Projecting room number and arrow cut from one sheet
A black projecting sign in which the room number, a long bar and an arrowhead are one piece, held out from the wall on a small plate. Made for hotels, offices and student housing with long corridors.
- Kind
- Projecting room sign
- Finish
- Black
- Fixing
- Wall plate with four screw holes
- Made
- In our workshop in Riga
About this piece
Room 330, a long bar and an arrowhead make up this black sign, all cut from one sheet. Each digit is drawn in thin, square-cornered strokes, and the three of them stand on the bar, which runs to the right and ends in two angled strokes that form the arrow. At the point of the arrow, a small white block joins the sign to a black wall plate with four screw holes.
Fixed by its plate, the sign stands out at right angles to the wall, so people walking down the corridor see it before they reach the door. The thin digits keep it light, and because number, bar and arrow are one part, there are no separate digits to line up or work loose.
Digits, bar and arrow are drawn as one outline; we make sure every join is strong enough and send the design for you to check in 3D on a private page. Signs like this are laser-cut from sheet as a single outline, then finished in black or another colour from our own spray room. For your version, change the numbers, the typeface, the direction of the arrow, the colour of the joining block and the size of the wall plate. One sign or a full corridor: there is no minimum order, and a series starts with one prototype.
What to send us for a quote
- The list of numbers, names or directions you need (a sign schedule)
- The style: a photo or a sketch of what you like
- How they will be fixed: screws, tape or a projecting bracket
- The size, and how many of each
No minimum order: one piece, a prototype or a full series.
How an order works
- Your briefSend the artwork, a drawing or a photo, the size and how many you need.
- Drawing and 3D reviewWe draw it to scale, and you check the design from each side on a private page.
- Quote and approvalThe cost and the scope are agreed before anything is made.
- Made in RigaWe make and assemble your piece in our Riga workshop. For a series, one prototype comes first.
Questions
Which way should the arrow point on a projecting sign?
That depends on where the room is from the spot where people read the sign. Mark the sign positions and the doors on a floor plan, and we draw each arrow to suit; you check every direction in 3D before production.
Can it match the room numbers we already have?
We can draw the digits in the typeface of your existing signs or in a line style like this one. Send a photo of a current sign beside a ruler, and we match the height and style in the drawing you check in 3D.
Ask for one like this
Tell us what you need, the size and how many. We reply personally to every request.
